Elegoo, our favorite 3D printer brand, just announced the release of two new budget resin 3D machines. While the Mars 5 “Standard” is equipped with a 6.6-inch 4K Mono LCD, the more advanced Mars 5 Ultra with a 7-inch 9K Mono LCD. A higher resolution means, better accuracy, finesse, and print quality. The price difference between the two models of the Mars 5 series is about 100 bucks.
Besides the LCD screen, which is the heart of a resin 3D printer, there are other significant differences between these two models. Both features One-Click Automatic Leveling, Self-Check & Overheat Protection, and Smart Mechanical Sensor but only the Mars 5 Ultra has an AI camera that detect print errors such as warping and empty plate. Furthermore the camera allows remote monitoring and time-lapse videos.
As most resins are toxic and have bad odor, both Elegoo Mars 5 models can be equipped with active air filters.
The COB Light Source behind the LCD acts like a heat source and can damage the price screen. To avoid premature failure, Elegoo equipped these two new machines with advanced overheat protection. When the LED temperature exceeds 80℃, the intelligent system triggers an alarm and halts printing automatically, ensuring enhanced safety and extended lifespan.
Elegoo Mars 5 series: Key features
- [User-Friendly Design] ELEGOO is committed to providing users a convenient printing experience. From the quick-release design of the build plate to the dual pour spouts design of the resin tank, along with the drip tray design to prevent resin drips, and the replaceable tank lock, every detail has been carefully considered to make your operation easier and more comfortable.
- [Advanced Overheat Protection] No more overheating worries. Enjoy carefree printing with the advanced high temperature protection. When the LED temperature exceeds 80℃, the intelligent system triggers an alarm and halts printing automatically, ensuring enhanced safety and extended lifespan.
- [Power-Loss Resume Printing] Power Outages? No Problem. The Mars 5 Ultra will automatically resume printing from where it stops. Say goodbye to wasted materials or time. Never again will you lose the printing progress.
- [Stunning 9K, True-to-Life] Featuring a 7″ mono LCD with 9K ultra-high resolution and 18μm XY resolution, the Mars 5 Ultra ensures the faithful reproduction of every intricate detail with stunning fidelity and breathtaking textures. Boasting 92% light uniformity, the advanced COB light source ensures consistent results, bringing your visions to life with impeccable precision.
- [Self-Check & Auto Leveling, Print Right out of the Box] With its smart self-check and automatic leveling functions, the Mars 5 Ultra allows all skill levels to dive straight into the creative process. No more setup hassles or tedious calibrations – simply unbox, power on, and print.
- [AI Camera Acts as Your Eyes, Stay in Total Control] Say goodbye to costly failures and wasted time as the AI camera detects errors in real-time, guiding you to flawless results. Never worry about empty build plate or model warps again – it’s a thing of the past. The AI camera monitors every step, instantly alerting you to any errors for immediate resolutions.
- [Section-based Exposure] No longer will you be bound by generic exposure settings. Imagine having the ability to finely tune the exposure time for each section, enabling you to determine the optimal exposure time, meticulously control and enhance the printing results.
Mars 5 Ultra vs Mars 5 “Standard”: In-depth comparison table
| Mars 5 Ultra | Mars 5 | |
| LCD Screen Size | 7-inch 9K Mono LCD | 6.6-inch 4K Mono LCD |
| Build Volume | 153.36 x 77.76 x 165 mm³ | 143.43 x 89.6 x 150 mm³ |
| Light Source | COB Light Source (405nm) | COB Light Source (405nm) |
| LCD Screen Protector | 9H hardness tempered glass | PET scratch-resistant film |
| Print quality (Resolution) | XY: 18×18μm (8520 x 4320) Layer Thickness: 0.01-0.2mm Z-axis Accuracy: 0.02mm |
XY: 35×35μm (4098 x 2560) Layer Thickness: 0.01-0.2mm Z-axis Accuracy: 0.02mm |
| Control screen | 4″ Capacitive Touch Screen | 3.5″ Resistive Touch Screen |
| Operating system | EL3D-4.0 | EL3D-3.0.1 |
| Slicing Software | Chitubox | Chitubox Voxeldance Tango |
| Other Functions | Tilt Release Technology, One-Click Automatic Leveling, Self-Check & Overheat Protection, AI Camera (Empty Build Plate Detection/Warp Detection/Real-Time Monitoring & Time-Lapse Recording), Smart Mechanical Sensor (Resin Shortage Alarm/Residue Detection Alarm/Leveling Failure Alarm), Power-Loss Resume Printing |
One-Click Automatic Leveling, Self-Check & Overheat Protection, Smart Mechanical Sensor (Resin Shortage Alarm/Residue Detection Alarm/Leveling Failure Alarm) |
| Resin compatibility | Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.) | Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.) |
| Connectivity | USB Interface & WiFi | USB Interface |
| Dimensions | 260 x 268 x 451.5 mm³ | 230 x 230 x 433.5 mm³ |
| Weight | 8.8kg | 6.6kg |
| Price | $269.99 | $179.99 |
Mars 5 Ultra review video by Uncle Jessy
[embedded content]
Pricing and availability
The new Mars 5 Standard can be ordered from Elegoo’s online store for $179.99 (€224,99) and the Mars 5 Ultra for $269.99 (€269,99). Both 3D resin printers comes with safter gloves and mask, resin tank, and tool kit. Additionally, you can order the Mars Mate Air Purifier for Mars Mate Air Purifier for $142.50.